Designed for sealing and insulation of all types of connections of power cables with paper oil-impregnated insulation, plastic insulation, cross-linked polyethylene insulation.
Inner surfaces of base and branches of multiple cable joint are coated with adhesive thermomelting layer that ensures perfect sealing after shrinkage.
Being evenly applied on the entire inner surface of the tube, the adhesive layer provides complete sealing of the connection after shrinkage of the tube.
Black marking on the tubes with the indication of the diameter before and after shrinking.
Model: EV009930Inner diameter before heat-shrink: 13Inner diameter after heat-shrink: 4Colour: EV000206Material: EV003904Shrink rate: EV009536Wall thickness after shrinking: 2,4Length: 1Operation temperature: -40.
110Mounting temperature: -10.
50AC 50 Hz operating voltage: ≤ 1000Tensile strength: ≥ 13Volumetric electrical resistance: ≥ 1x10^12For dielectric strength up to: ≥ 10Min shrinkage start temperature: 120Min full shrinkage temperature: 150Thickness of adhesive layer after full thermus: 0,6Type: EV004267.
| Shrinking.model | Ev009930inner diameter before heatshrink13inner diameter after heatshrink4colourev000206materialev003904shrink rateev009536wall thickness after shrinking24length1operation temperature40110mounting temperature1050ac 50 |
|---|---|
| Hz operating voltage | 1000tensile strength 13volumetric electrical resistance 1x1012for dielectric strength up to 10min shrinkage start temperature120min full shrinkage temperature150thickness of adhesive layer after full thermus06typeev004267 |
