Designed for sealing and insulation of all types of connections of power cables with paper oil-impregnated insulation, plastic insulation, cross-linked polyethylene insulation.
Inner surfaces of base and branches of multiple cable joint are coated with adhesive thermomelting layer that ensures perfect sealing after shrinkage.
Being evenly applied on the entire inner surface of the tube, the adhesive layer provides complete sealing of the connection after shrinkage of the tube.
Model: EV009930Inner diameter before heat-shrink: 25,4Inner diameter after heat-shrink: 12,7Colour: EV000184Material: EV003904Shrink rate: EV009534Wall thickness after shrinking: 1,1Length: 1Operation temperature: -55.
125Mounting temperature: -10.
50AC 50 Hz operating voltage: ≤ 660Tensile strength: ≥ 10,4Volumetric electrical resistance: ≥ 1x10^14For dielectric strength up to: ≥ 15Min shrinkage start temperature: 70Min full shrinkage temperature: 125Thickness of adhesive layer after full thermus: 0,50Type: EV004267.
| Tube.model | Ev009930inner diameter before heatshrink254inner diameter after heatshrink127colourev000184materialev003904shrink rateev009534wall thickness after shrinking11length1operation temperature55125mounting temperature1050ac 50 |
|---|---|
| Hz operating voltage | 660tensile strength 104volumetric electrical resistance 1x1014for dielectric strength up to 15min shrinkage start temperature70min full shrinkage temperature125thickness of adhesive layer after full thermus050typeev004267 |
